The slitting method of
titanium plate and titanium strip is characterized in that the uncoiled titanium and titanium alloy strip are adopted: pinch-slitting-directional material separation-pressing plate-coiling-winding-unrolling-packaging process Line method processing. By adopting the method of the invention, the coils of titanium and titanium alloy strips with an opening length of several thousand meters can be longitudinally cut, the uneven edges of the titanium strips can be cut off, and the wide titanium strips can be longitudinally cut into multiple strips according to user requirements. Narrow titanium strips of different widths; or just trim the titanium strips, keeping the width of the titanium strips.
Clamping is to feed the running titanium strip into the slitting machine by clamping a pair of rubber rollers; longitudinal cutting is to cut the running titanium strip along the titanium strip by a set of disc scissors installed on a pair of horizontal axis rollers. The length direction is longitudinally cut into a number of narrow titanium strips of different widths; at the same time, the two outermost pairs of disc shears are used to cut off the uneven edge of the titanium strip, and the cut edge lines are wrapped by the collection wheel on the side of the disc shears The directional cloth is to guide the longitudinally sheared and separated narrow titanium strips through a cloth tray set on a pair of transverse rubber rollers, and the same gap is maintained between the adjacent narrow strips to enter the platen table neatly.
The pressing plate is used to guide the divided narrow titanium strip to the winder through the clamping of the platen table; the coil splitting is to cut the slit titanium strip into coils of different lengths according to the needs; winding: the narrow titanium strip is set on the coil. Guided by a set of directional distribution discs above the winding mandrel, multiple narrow titanium coils are wound on the same winding mandrel; unloading refers to that after all narrow titanium strips are rolled into coils, the rolling trolley supports the titanium from below Coil, the coiler shrinks and expands the block, so that the inner ring core of the titanium coil is loosened, and the narrow titanium coil is manually bundled and fastened with a strap, and then the unloading turning table next to the coiler is rotated to remove the narrow titanium coil from the coiler. It is drawn out from the mandrel, and then rotates the unloading turning table to transport the narrow titanium roll to the packaging table for paper wrapping and packaging.
